• (0778) 3540263
  • admin-sales@ellco-group.com

Conventional heat detector with LPCB EN54 certification AW-CTD382

AW-CTD382 is conventional photo-electronic heat detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.

Select Size Zone
Select Color
Product Price

The conventional rate of rise heat detector uses thermal component to detect the temperature changing in the environment. It can enable fire alarm when the temperature difference achieved the setting rate of rise temperature value. It can also enable fire alarm when the absolute temperature value reach the setting fixed value. It has a stable and reliable working performance.

Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until rest by panel.

Operating Voltage Range:   9 to 28 VDC Volts Non-polarized
Standby Current:          
Maximum Alarm Current(LED on):     
(1K Ohm current-limiting resistance)
Operating Humidity Range: ≤95%RH(40℃±2℃)RelativeHumidity,Non-condensing 
Operating Temperature Range:      -10℃ to 50℃(14ºF to 122ºF)
Fix Temperature Alarm:      57℃(135ºF)A2R
Rate of rise Alarm:     7.1℃/5S A2R
Height:  48.2mm installed in Base
Diameter: 99.45mm
Standard Number ref:   EN 54-7:2000
EC certificate:   0832-CPR-F2072          

Terminal 6: IN+(Zone Input+)

Reviews (0)

Review not found

Give a Review

You must have to login to give a review

Related Products

See all the related products from below

Subscribe To Our Newsletter